Skip to Content

Terex BT28106

Boom Trucks Cranes


32'-106' Boom, 2-Sheave Block w/Hook, Swing Away Lattice Jib: 30'-47', Super Duty Wood Deck Flatbed Terex Super Stinger BT28106 boom truck crane (28 ton) with all standard equipment including:
Basic Machine:
• 28 Ton (25.4 mt) capacity rating
• Mainframe consists of all-steel, box construction. Subframe length designed for 22’ flatbed
• Dual side, stand-up controls with foot throttle pedal
• Front main “A” frame outriggers extend forward at splayed angles from the mainframe forming an overall K Pattern outrigger design. Front outriggers are independently controlled with an overall extended span of 22’ 6” to the outside of the pads
* Rear outriggers “H” frame, out-and-down type with an overall extended span of 17’ 6” to the outside of pads
• Rotation Planetary gearbox – hydraulic motor driven with 370 degrees of non-continuous swing rotation
• Crane consoles include 4 lever rubber booted control handles – engine start/stop switches – signal horn – hour meter – bubble level – hydraulic test ports and warning light for high hydraulic oil temperature. Outrigger control switches mounted in separate box and swing arm to position on either side of crane
• GREER INSIGHT Rated Capacity Limiter system with digital read out display, integrated work area definition program and ATB anti-two block internal boom wiring
• Standard Color Scheme: Terex Gray (Mainframe Pedestal, Subframe, Front and Rear Outriggers, 2nd, 3rd, & 4th Boom Sections, Boom tip Head Flatbed) Terex White (Turret, Base Boom and Jib) – Terex Black (Control Stand, Operators Platform and Guards, Access steps and ladders)
* Four section KEEL designed boom, full power, mechanically synchronized with 32” to 106’ maximum length (9.8 – 32.3 m) and maximum tip height of 115’ (35.0 m)
• Each KEEL section is high-strength, steel plate construction designed to optimize the strength to weight ratio
• Boom sections are color stripe coded to corresponding load chart
• Boom Tip head is equipped with 3 head sheaves designed for quick-reeving – includes one and two-man steel workbasket attachment point
Hydraulic System:
• High capacity, full flow oil filtration system with a 80 gallon (303 L) capacity reservoir and internal suction filter screen
• Three section vane pump is PTO driven and allows independent functioning of Boom, Winch and Swing operations
• The combined system output is 67 gpm at 2300 rpm pump speed and up to 3000 psi operating pressures
• The return line filter is 10 micron and is externally mounted to the reservoir
• Standard Two-Speed Planetary Hoist – hydraulic motor driven - Maximum Line Pull 11,854lbs / 5,532lbs @ Low speed/high speed setting
• Optional choice of 315’ (96m) of 9/16-in (14mm) Regular Lay or Rotation Resistant wire rope
• Maximum line speed of 137 / 209 fpm low speed / high speed
• Standard grooved drum with tapered flanges for improved spooling
• (1) Hard Copy Operators Manual – (10 DCROM includes Operators/Parts Schematics/Greer/Wire Rope (manuals) – (1) CDROM includes AME Safety Video
• Air / Electric Shift PTO
Hoist Wire Rope:
• Rotation Resistant Wire Rope (19x19 Flex-X, or equivalent, 350 ft (106.7m) of 9/16 in (14mm))
Overhaul Ball
• Overhaul ball and Hook – (7 US ton (6.4 mt) capacity rating) (175lbs)
Hook Block
• 22.5 US ton (20.4 mt), 2-Sheave Block with Hook (4-5 parts of line) 250 lbs)
• Swing Away Lattice Jib: 30’ – 47’ (9.1 m – 14.3m) – Two Section – includes attachment point for one and two man steel workbaskets
• Super Duty Wood Deck Flatbed – 22’ (264” x96”_ (671 on x 244 cm) ((12” cross members and heavy deck)
• Steel Toolbox – 18” x 18” x 30” (with locking door) (46-cm x 46-cm x 76-cm)
• 2013 Freightliner M2 300HP – Manual Transmission – 60,000 GVW

Product Type
Boom Trucks Cranes
Capacity Class
28 tons
Maximum Boom Length (ft)
Maximum Jib Length (ft)
Maximum Tip Height (ft)
Maximum Counterweight (lbs)
Overall Length (ft)
Carrier Length (ft)
Number of Hoists
Tire Size
Additional Information
Crane Chart
© 2019 Copyright Scott-Macon Equipment. All Rights Reserved.
Back to top